Ozpig "The Piggery"

If you are unlucky enough to have rust take over your Ozpig sometimes the best thing to do is re-paint. The 5 part how-to guide will walk you through each s...

Preparation for painting is the most important part so take your time and do the job properly because if you take any shortcuts now your new paint job will ...

This step will sort out a few of the parts that may need to be cleaned up and restored without painting. Firstly it's a good time to give the insi...

With the Ozpig sanded back, all rust removed, clean and dry it is ready to put the paint on. First up it is important to choose the correct paint. You will ...

Once the paint has dried for a few days you can re-assemble it all, basically in the reverse of how you pulled it apart. Use a can of WD40 or similar and g...

Seasoning the BBQ plates provides a two fold advantage, firstly the coating from the seasoning helps prevent any rust forming on the cooking surface and kee...

Once you've assembled your new Ozpig it's very important to following the correct burn in procedure for the first use. It's during this time ...

The swivel baffle design adjustable vented door brings safety to the forefront while still allowing the ambiance of a relaxing timber fire to shine through....